Teat End Scoring: Spotting Overmilking Early

The teat end is the only part of the cow that touches the milking machine every day, twice or more, for the whole lactation. It also happens to be the first line of defense against mastitis. The cow can't file a complaint, so this is as close as she gets. If you want to know how your milking system is really treating cows, look at the teat ends before you look at the printouts.
Teat end scoring is a quick visual check of the skin at the tip of the teat, done right after the unit comes off. A smooth end means the machine and routine are working. A rough, cracked or ring-shaped end means something is pulling, pinching or running too long. It takes minutes, costs nothing, and often finds problems before the cell count does.
Why teat ends matter
The streak canal at the tip of the teat is a tiny muscle-sealed opening. After milking, it stays open for a while, which is why cows should stay standing for a bit and why post-milking dip matters. If the tissue around it is damaged, the canal doesn't close as well and bacteria find it easier to get in. Rough teat ends are linked with higher risk of mastitis, and the damage tends to accumulate across the lactation.
That makes teat end condition a rolling report card. A cow's udder won't tell you the vacuum is too high, but her teat end will, in its own way, after a few weeks.
The four-score system
Most dairies use a simple scale that looks at the ring of tissue around the teat orifice. The exact wording varies slightly between sources, so check the version your milk-quality consultant or extension office uses. The common version is:
| Score | What you see | What it usually means |
|---|---|---|
| Normal (no ring) | Smooth, flat or slightly pink end with no raised ring | Healthy; machine and routine are doing fine |
| Smooth ring | A raised ring around the opening, but the surface is smooth | Mild change, common; watch for trends |
| Rough ring | Raised ring with a rough, cracked or scaly surface | Tissue is being stressed; look at machine settings and timing |
| Very rough | Ring with open cracks, thick keratin spikes or a frilly edge | Significant damage; address the cause promptly |
Some mild thickening is common, and a barn full of perfectly flat teat ends is unusual. What matters is how many ends fall into the rough categories, and whether that number is rising.
How to score a string
- Pick a consistent time. Score teats right after unit removal, before dipping, while the tissue is still in its post-milking state.
- Use good light. A headlamp is cheap and worth it.
- Look at all four teats on each cow, since front and rear can differ.
- Score a meaningful sample. Scoring a whole pen or at least a few dozen cows gives a better picture than three cows who happen to be standing near the door.
- Score the same way each time. One person, or two people who've compared notes, keeps the data comparable.
- Write it down. Track the percentage in each category, by pen and by days in milk.
Many consultants suggest that no more than a small share of teat ends should be rough or very rough, but exact targets differ. Ask your milk quality advisor which benchmark they use, and look at your trend, not just a single day's numbers.
What rough teat ends are telling you
Overmilking
Overmilking is the classic cause. When the unit stays on after the cow has finished letting down, the liner keeps working on an empty teat. The ends get swollen and keratin builds up. Things that cause it include slow unit removal, no automatic takeoffs, unit attachment too early or late, and milkers juggling too many units at once. See attaching and removing milking units the right way for the routine side.
Vacuum and pulsation
Vacuum that's too high, unstable or fluctuating can damage teat ends. So can pulsation settings that give too little rest to the teat. Check the settings against the manufacturer's recommendations and have the system tested, which an experienced technician can do as a dynamic milking system test. For the background on numbers, read what vacuum level your machine should run and the explainer on pulsation rate and ratio.
Liners
Worn, hardened or wrong-sized liners are common culprits. They lose elasticity, slip, and stop massaging the teat properly. If scores worsen right before the liner change interval, there's your clue; how often to change liners covers how to track it.
Cow factors
Not every rough end is the machine's fault. Teat shape, teat length, milk yield, stage of lactation and even breed can affect scores. High-producing cows at peak milk tend to show more changes, and some cows have pointed or long teats that fit the standard liner poorly. If only a few cows look rough and the rest look fine, the issue may be the cow, not the system.
What to do with the results
- Look for patterns. Rough ends concentrated in one string, one parlor side or one shift point to a specific cause.
- Check unit removal timing. If milkers are leaving units on to chat, find out why. A long to-do list near the parlor is its own piece of overmilking equipment.
- Test the machine. Bring in a qualified technician if scores don't improve after fixing routine problems.
- Consider changes carefully. Make one change at a time and rescore a few weeks later. Teat ends need time to recover.
- Watch for mastitis. Rising rough ends can come before rising somatic cell count, so compare notes with your cell count records.
The National Mastitis Council publishes guidance on milking machine function and udder health, and your dairy extension office can often point you to someone who's trained to score teat ends.
Common mistakes
- Scoring after the post-dip has dried and covered the tissue.
- Scoring only the cows that look bad, which makes every herd look worse than it is.
- Fixing the machine without checking unit removal habits, or the other way around.
- Changing three settings at once, then wondering which one worked.
- Treating a smooth ring as a failure. A little ring is normal, and chasing perfection costs more than it returns.
Quick answers
How often should I score teat ends?
Many dairies score on a regular schedule, such as monthly or whenever something changes in the machine or routine. The key is to be consistent, so you can see a trend.
Do rough teat ends cause mastitis?
Rough ends are associated with higher mastitis risk because the damaged tissue doesn't seal as well. They are a warning sign, and fixing the cause can lower that risk.
Can I fix overmilking without buying new equipment?
Often, yes. Better unit attachment timing, prompt removal, a consistent routine and fresh liners can help. If scores stay rough, have a technician test the system to find the equipment cause.