Making Dairy-Quality Hay in a Wet Summer

Hay for dairy cows is made in the gap between the last rain and the next one, and in a wet summer that gap is roughly the length of a sandwich. You have three realistic choices: make dry hay faster, make it wetter on purpose as baleage or haylage, or accept lower quality and plan the ration around it.
What you should not do is bale damp hay and hope. Wet hay heats, molds and in the worst cases can start a barn fire, and the cows will not thank you for what is left. Every wet year someone learns that the hard way.
Why hay will not dry
Drying depends on sunlight, wind, humidity and how thick and tight the swath is. In a wet summer all of those work against you, and the crop often keeps respiring and losing sugars while it lies in the field. Rain on cut hay leaches soluble sugars and protein, while the fiber stays behind. That is why rained-on hay tests worse and cows eat less of it. Each extra day on the ground also costs leaves, the most nutritious part of alfalfa.
The balance to strike is between cutting at the stage that gives you quality and cutting when the forecast gives you a chance. A good cutting window is worth more than a perfect maturity stage. For timing, cutting schedules for high-quality alfalfa explains the tradeoff in detail.
Ways to speed drying
- Mow wide. A wide swath exposes more surface to sun and wind. Narrow windrows dry slowly and stay damp underneath.
- Use a conditioner. Crimping or crushing stems lets moisture escape from the thick part of the stalk. A well-adjusted conditioner is often the single biggest help.
- Mow early in the day. After the dew lifts, so the crop gets a full day of drying.
- Ted or rake carefully. Turning hay speeds drying, but every pass shatters leaves on legumes. Do it when the hay is damp enough that leaves hold on.
- Merge into windrows at the right time. Too early and the windrow holds moisture, too late and leaf loss climbs.
- Watch the weather, not the calendar. A good forecast for several days is worth waiting for, and radar apps are cheaper than rain-damaged hay.
Testing moisture before baling
The old twist-and-feel test is a start, but a moisture tester gives you a number. Dry hay generally bales safest at around 15 to 18 percent moisture for small squares, and lower for big squares and round bales because they hold heat. Check several places in the windrow, because the center stays wetter than the surface. Probe a few bales after baling and recheck them within the next day or two.
If you are unsure, do not bale. A day of waiting costs less than a mow of moldy hay.
Preservatives
Hay preservatives, often based on propionic acid or buffered acid products, can allow baling at higher moisture with less heating and mold. They add cost and require proper application, and they do not rescue hay that is far too wet. Follow label directions exactly, and ask your nutritionist or extension agent which products have performed well in your area. Never add water or a quick fix to make hay look better or to hide a problem, and be aware that selling moldy hay to other dairies is a good way to lose customers.
Changing the plan: baleage and haylage
When the weather will not cooperate, make it wet on purpose. Baleage, meaning wrapped bales at higher moisture, or chopped haylage in a bag or bunker, ferments instead of drying. You need to wilt the crop to the correct moisture range, since it still must ferment properly, but the wilting window is shorter than the drying window for dry hay. For details, haylage wrapping, moisture, layers and timing gives the specifics on how much to wilt and how much plastic to use.
If you do not own a wrapper, custom operators often serve wet-weather demand, so line one up early before the entire county has the same idea. The same weather that keeps you from making dry hay will also fill every custom operator's calendar, and a few of them will be taking calls from you at 9 p.m.
Test it, then feed it
A wet summer produces a wide range of quality, even within the same field. Sample each cutting separately, and sample the right way, so you can build the ration on facts. Reading a forage test will help you tell the difference between a lot that looks bad and one that actually is. Rain-damaged hay may be low in energy and protein, so it may fit better with dry cows, heifers or lower-producing groups than with the high string. If it smells moldy, looks dusty or has visible mold, do not feed it to cattle, especially pregnant or fresh cows. Consult your nutritionist and veterinarian about mold and mycotoxin risk, and see mycotoxins in dairy feed for signs to watch.
Many farms have a hay story that grew with each retelling, and farm.FM has a few of its own, such as this farm.FM story about a hay bale wedding disaster. If you are baling in a wet summer, you can at least be glad your bales are not on the guest list.
Plan B: buy or replace
If you cannot make decent hay, buying quality hay or substituting another forage may be cheaper than feeding poor hay and losing milk. Price it on a dry matter and quality basis, not per bale. Ask for a forage test, and check bales yourself rather than trusting a photo. Whether alfalfa is worth growing on your dairy also depends on how often your weather lets you make it well.
Regional note: wet summers hit the Northeast, the Upper Midwest and the Southeast in different ways, with humidity and slow drying common in all three. Irrigated Western operations have more control over cutting dates but still face rain in some seasons. Local extension offices often publish hay-quality updates and drying guides, and the University of Wisconsin forage page is a good place to start.
Quick answers
What moisture is safe to bale hay?
Generally in the mid-teens for dry hay, with the exact target depending on bale type and size. Use a tester, check several spots, and recheck bales after baling.
Can I feed rained-on hay to dairy cows?
If it is not moldy, often yes, but it may be lower in energy and protein. Test it and match it to a lower-demand group, and keep it away from fresh and high-producing cows unless your nutritionist approves.
Is baleage better than dry hay in a wet year?
It can be, because it needs a shorter wilting window and avoids heating and mold. It needs wrapping equipment and care with moisture and plastic.