Dairy Hub

Barns, Cow Comfort & Equipment

Sand Bedding Basics for Freestall Barns

Holstein cow in a robotic milking stall

Sand has one job in a freestall: be deep, clean and dry enough that a cow lies down on it and stays there. Everything else about running it, from the grade you buy to the rake you own, comes back to that. The farms that get great results from sand are rarely the ones with the fanciest barn. They are the ones who top up the stalls often and never let them get thin.

The quick numbers: Ontario's dairy housing guidance suggests aiming to keep deep sand a couple of inches above the stall's reference level, filling to no more than about 6 inches above it, and treating anything more than about 3 inches below it as too thin. Add small amounts often rather than big loads occasionally, and groom every day. A sand stall without a rake is a sandbox for the cat.

What sand does well

Cows like it. Sand conforms to the body, grips well under hooves, and drains water. It is inorganic, so it does not feed the bacteria that cause environmental mastitis the way wet sawdust or straw can, and it does not abrade the hocks. The Ontario guidance on stall bases and bedding describes sand as comfortable with excellent traction. The flip side is cost and manure handling, which we get to below. If you are still deciding whether sand is right for your herd, sand versus mattress stalls weighs the tradeoffs.

Choosing the sand

Not all sand is the same. Look for clean, washed sand that is free of organic matter, clay and rock. Ask the supplier for a sample and look at it: it should be loose and granular, not dusty or clumpy. Fine sand sticks to cows and travels through the barn. Coarse sand is rough on teats and hock skin. Many dairies end up with a medium, well-washed product from a local pit, and your nutritionist, extension agent or milk quality rep can tell you what is working in your region.

A few practical checks:

  • Is it consistent from load to load? Variation causes surprises in your stalls and in your manure pit.
  • Does it contain a lot of fines or silt? Those hold water and can turn bedding into a paste.
  • Can you store it under cover? Wet sand is heavy, clumpy and hard to spread.
  • Can the supplier deliver on a schedule, including winter? A stall full of frozen sand is a slow-motion argument.

Source and delivery matter as much as the product. Sand is heavy, and hauling distance will shape the cost per cow more than the price at the pit.

How deep and how often

Sand depth is not a mystery. The curb at the back of the stall is your gauge. Keep the sand surface at or above the curb, with enough depth that a cow can sink in and shape the bed to her body. When the surface falls below the curb, cows step down into a hole and the bed gets harder on the knees, and soon you are watching perching and diagonal lying, which is covered in why cows stand half in, half out of stalls.

Most dairies add sand to the stalls on a regular schedule, anywhere from daily top-ups to once or twice a week depending on how fast cows move it out. Cows carry sand out on their bodies and push it back into the alley as they rise, so a stall can look fine in the morning and be low by afternoon. Look at the back third of the stall first. That is where sand goes missing and manure goes in.

A rough plan:

  1. Set a target level relative to the curb, and mark it on a post if you have to.
  2. Check a row of stalls each day with a rake or a hand. Fix the low ones first.
  3. Add sand in small, frequent amounts. Dump trucks are not a maintenance plan.
  4. Rake or groom to level the bed and remove manure and wet clumps.
  5. Every few weeks, scan the whole barn for low spots, uneven beds and stalls that cows avoid.

Daily stall grooming

A stall that is raked daily stays level, and a level bed gets used. Pick out manure, smooth any bumps and refill the low spot at the rear. The job is easier if you do it while cows are out at milking. It also takes less time than you think, once it is a habit. It takes far more when you skip it for a week, because wet clumps and compacted spots build up. Staying ahead of moisture is a big piece of how to keep freestall bedding dry and clean.

The manure side of the story

Sand that leaves the stall ends up in your manure system, and it does not behave like manure. It settles. It wears pumps, scrapers and agitators. It builds up in pits, flush lanes and lagoons. Ontario's guidance has a blunt way of putting it: once sand is mixed with manure it can become a manure-handling nightmare.

That does not mean sand is a bad choice. It means you plan for it:

  • Pick a manure system that can move sand, and read flush versus scraper versus robot manure systems before you decide.
  • Consider settling lanes or a separation step, so you can reclaim sand and cut your bedding purchases.
  • Check your storage size and clean-out schedule. Sand takes up room. See sizing manure storage for your dairy herd.
  • Pay attention to pumps and pipes. If they are not rated for abrasive material, expect to replace them sooner.

Rules about manure storage, handling and land application vary by state and county. Your state environmental or agriculture agency and your local extension or NRCS office can tell you what applies to your farm before you build anything.

Sand over mattresses

Some herds use a layer of sand over a rubber-crumb mattress, typically an inch or two, which gives some of sand's comfort and keeps the stall dimensions more consistent because the sand does not pack down much. It uses less sand than a deep bed, and it is a middle path for barns that were built with mattress platforms. It is not a substitute for a proper deep bed in a barn set up for it, but it is a decent compromise.

Regional notes

In the Southeast and Southwest, sand is popular where cow comfort in hot weather is a top concern and a good source is close. In the Upper Midwest, sand works, but keep a close eye on freezing weather, since wet, frozen sand is hard on both cows and loaders. On the West Coast, sand supply and manure handling rules shape the choice. In the Northeast, many farms use sand in newer freestalls but stay with other bedding in older barns. Ask neighbors what sand source they trust, and what they would not do again.

Mistakes to avoid

  • Letting the bed fall below the curb line.
  • Buying cheap sand with silt and clay, then wondering why it clumps.
  • Skipping grooming when everyone is busy with corn silage.
  • Forgetting the manure system until the pump quits.
  • Comparing yourself with a neighbor who has a sand supply across the road and a very different barn.

If you are weighing bedding options more broadly, sawdust, straw or sand lays out how they compare on cost, availability and cleanliness.

Quick answers

How deep should sand be in a freestall?

Keep the surface at or above the rear curb, with enough depth that cows can sink in and form a bed. Ontario guidance suggests aiming a couple of inches above level and not letting it drop more than about 3 inches below it. Check your stall dimensions first.

How often should I add sand?

Often, and in small amounts. Many farms top up daily or several times a week, depending on how quickly cows move it out. Frequent small additions keep stalls level and cows lying down.

Can I reuse sand from the manure?

Many dairies do, using settling lanes or separators and then drying the sand before it goes back in the stalls. It cuts bedding costs but needs the right equipment and a good drying and storage setup.

More from farm.FM Need a break from the paperwork? Farm humor and funny farm stories are always in season at farm.FM.